Akasa Integral Manuel d'utilisateur

HDD external enclosurefor data-storage mobility with USB 2.0 and eSATA interfaceUSER Manual

9HOW TO PARTITION THE EXTERNAL HARD DISKBefore you partition your hard disk, please be aware that this will destroy all your existing data on the driv

1EnglishAKASA Company noticesThe information contained in this document is subject to change without notice.All rights reserved. Reproduction, adaptat

2 Thank you for your purchase of the AKASA INTEGRAL eSATA external hard drive enclosure. This Plug & Play enclosure enables you to use both t

3• Interfaces: Serial ATA I / II, USB 2.0/1.1• Compliance with Gen1i, and Gen1m of Serial ATA II Electrical Specification 1.0• Supports SATA I

4Hard Disk InstallationOpen the back of the enclosure by undoing the securing screws and sliding the tray out of the aluminum housing. NOTE: Disconne

5Before fully inserting the tray, connect the HDD activity LED to the 3-pin connector. 6.Insert the tray completely into the housing and secure the en

6NOTE:Regardless of the hard disk interface used in the enclosure (SATA or IDE), the USB2.0/eSATA switch must be switched to USB mode.Connecting the I

7Disconnecting the INTEGRAL eSATA (USB mode)WARNING! Close all windows and quit all running applications that are stored on the Integral P2SATA Extern

8NOTE:The SATA connection of the enclosure is only avaliable with SATA HDD installed. Motherboard or adapter card with SATA interface is required. Mak